[ad_1] When extensive construction, maintenance, or inspection work is required in deep water, saturation divers are often called in. Saturation divers live in pressurized dry chambers on diving support vessels or barges for roughly a month at a time, taking a once-daily diving bell ride to a work site on the ocean floor. Because “sat”
[ad_1]
When extensive construction, maintenance, or inspection work is required in deep water, saturation divers are often called in. Saturation divers live in pressurized dry chambers on diving support vessels or barges for roughly a month at a time, taking a once-daily diving bell ride to a work site on the ocean floor. Because “sat” divers are “stored” at an air pressure equivalent to or near the water pressure at the working depth, they need only decompress once at the end of their month-long rotation, making for more efficient deep water work.
Saturation diving is the pinnacle of the commercial diving industry in which divers make the most money while enduring the greatest risk to life and limb. It’s a dangerous job of long days and dives up to six hours in length in extremely cold water (39 degrees Fahrenheit on the seabed in the North Sea). For saturation divers, tracking the time becomes essential to maintain a sense of chronological equilibrium and general sanity.
While many scuba divers no longer wear watches, instead allowing diving computers to calculate their decompression schedule and required stops, commercial saturation divers often wear watches in their unique pressurized workplace. Sat divers don’t wear watches to track their bottom time and decompression schedule, but for the seemingly pedestrian task of tracking the time of day, albeit in salty, arduous circumstances.
Divers “in sat” breath a helium-rich atmosphere in order to avoid the toxic effects of oxygen and nitrogen at depths, but helium can be hard on watches as its tiny molecules sneak through seals and into a watch under pressure, causing the crystal to literally burst off the watch as the now-trapped helium molecules expand when exterior pressure is decreased during decompression. In the early days of sat diving, the then-adolescent sport watch industry stepped up to equip sat divers with watches built to withstand the unique demands of saturation diving.
In the 1960s, Rolex and Doxa built watches with special valves to allow the escape of helium from inside watch cases during decompression. Helium release valves are now commonplace in so-called professional diving watches, despite how few people actually need them or actually understand their purpose. As a commercial diver myself, though on a shallower and less extreme scale, I reached out to a few saturation divers to get the skinny on what watches actually go diving. These guys aren’t the type to call out model numbers, but they did know all the names.
Unequivocally the saturation diving watch, the ruggedly built Sea-Dweller stands almost alone as the first diver’s watch to be equipped with a helium release valve (though Doxa’s very rare Conquistador also claims the honor). Of all the sat guys I queried about the topic, every single diver listed the Sea-Dweller as the watch most commonly seen and used watch in sat. Though expensive, you can’t argue with the Sea-Dweller’s pedigree.
Price: $11,350
Diameter: 43mm
Water Resistance: 1,220 metres/4,000 feet
Though not equipped with the theoretically essential helium release valve, the venerable Rolex Submariner was still mentioned by several sat divers, including an old timer who explained to me how “every watch has a helium escape valve…it’s called the crown”, meaning the diver simply unscrewed the crown during the days-long decompression to allow the expanding helium molecules to escape.
Price: $8,550
Diameter: 42mm
Water Resistance: 300 meters/1,000 feet
Watch more of This Week In Gear video reviews.
Though sat diving is largely Rolex-dominated, there are still a lot of Omega fans in deep water. The helium release valve-equipped Planet Ocean series was mentioned several times by divers as a cheaper and equally capable alternative to the Sea-Dweller. (The valve is in this case manually operated). One seasoned sat diver did mention Seamasters are known to explode when owners forget to open the helium valve — an expensive mistake.
Price: $6,200+
Diameter: 39.5, 43.5, or 45.5mm
Water Resistance: 600 meters/2,000 feet
Omega’s Seamaster Diver 300 series has been a mainstay in professional diving for decades. Many sat divers in the North Sea hail from the UK, and the James Bond connection felt so prominently in this model probably doesn’t hurt. With a manually operated helium release valve like the Planet Ocean series, divers must again remember to open the valve upon decompression.
Price: $5,200
Diameter: 42mm
Water Resistance: 300 meters/1,000 feet
For budget-minded saturation divers, Divex, a manufacturer of commercial diving equipment, also produces a fine Japanese-quartz (likely Seiko) powered watch that punches way above its weight in terms of price-to-performance ratio. The Divex Offshore is also easily available for order while buying other essential diving equipment, maybe even on the company dime. Not every diver is a watch nerd, and for the few who just want something to keep time and survive the trip, the Divex Offshore 500 has carved out a place in sat diving.
Price: $130
Diameter: 44mm
Water Resistance: 500 meters/1650 feet
[ad_2]
Source link
){kind=link}
Comments